{$cfg_webname}
主页 > 机械机电 > PLC >

基于PLC的智能还书机控制系统研究与设计(附CAD原理图接线图)

来源:wenku163.com  资料编号:WK16315787 资料等级:★★★★★ %E8%B5%84%E6%96%99%E7%BC%96%E5%8F%B7%EF%BC%9AWK16315787
资料介绍

基于PLC的智能还书机控制系统研究与设计(附CAD原理图接线图)(任务书,开题报告,外文翻译,论文说明书10000字,CAD原理图接线图)
摘要
综合国力的提高使人民不断富裕起来,他们的业余生活逐渐丰富,我国的文化事业也开始全面发展,图书馆地位越来越高,人们去图书馆的次数越来越多,然而图书馆的管理模式并没有实现大幅度的改善对图书的管理也不可避免的出现了许多问题。目前,“条形码+集成管理系统+磁条防盗”技术依旧是为国内图书馆所采用的主流技术,但这种方式存在条码易污染、易破坏且安全性差的问题。因此,图书管理系统的升级换代,简化还书系统是非常有必要的,对我国的全面发展具有重要的意义。
书籍是人类历史的见证者也是中华文明的传承者,有效管理图书是至关重要的,对图书进行保护、高效的整理和分配是图书馆的主要任务。本文主要介绍了通过PLC芯片对图书馆的还书系统进行智能控制,它克服了传统使用条形码,具有的易污染、易破坏且安全性差的弊端,采用UHF图书标签,提高了图书管理的效率和安全性。
论文首先介绍了本次毕业设计的课题背景,分析了国内外智能还书的发展现状及设计智能还书机的意义。在此基础上,提出了基于博途软件为核心,RFID 技术为辅助的智能还书机的总体设计。
关键词:PLC  RFID  UHF 图书标签还书机

Abstract
Theimprovementoftheoverallnationalstrength has made the peoplemoreprosperous, their spare-time life is gradually enriched, China's cultural undertakings have also begun to develop in an all-round way. The status of libraries is getting higher and higher. People go to libraries more and more. However, the management mode of libraries has not been greatly improved and many problems inevitably arise. At present,"barcode + integrated management system + magnetic bar anti-theft" technology is still the mainstream technology used by domestic libraries,but this way has the problems of easy pollution,easy destruction and poor security. Therefore, it is very necessary to upgrade the library management system and simplify the book return system,which is of great significance to the overall development of our country.
Books are the witnesses of human history and the inheritors of Chinese civilization. Effective management of books is of paramount importance. The main task of libraries is to protect, organize and distribute books efficiently.This paper mainly introduces the intelligent control of library's book return system through PLC chip. It overcomes the disadvantages of traditional use of bar code, which is easy to pollute, easy to destroy and poor security. UHF book label is used to improve books’efficiency and security of management.
Firstly, the thesis introduces the background of this graduation project, analyses the development status of intelligent book returning at home and abroad and the significance of designing intelligent book returning machine. On this basis, the general design of intelligent Book returner based on Botu software as the core and RFID technology and the assistant is put forward.
Key words: PLC RFID UHF book label returner

基于PLC的智能还书机控制系统研究与设计(附CAD原理图接线图)
基于PLC的智能还书机控制系统研究与设计(附CAD原理图接线图)
基于PLC的智能还书机控制系统研究与设计(附CAD原理图接线图)


目录
摘要    I
Abstract    II
目录    III
第一章绪论    - 1 -
1.1 课题背景及研究意义    - 1 -
1.2 国内外的发展状况    - 2 -
1.2.1 国外的发展现状    - 3 -
1.2.2 国内的发展现状    - 3 -
第二章方案设计    - 4 -
2.1 总述    - 4 -
2.2 仿真软件选择    - 5 -
2.2.1 MCGS嵌入式版    - 5 -
2.2.2  MCGS通用版    - 5 -
2.2.3  MCGS网络版    - 6 -
2.3 数据库选择    - 6 -
第三章硬件部分设计    - 8 -
3.1 总体设计    - 8 -
3.2 I/O分配表    - 8 -
3.3 PLC及其扩展模块选型    - 9 -
3.4  PLC接线图    - 9 -
3.5其他硬件选型    - 10 -
3.5.1镜面反射式光电开关    - 10 -
3.5.2角位移传感器    - 10 -
3.5.3电机选型    - 10 -
第四章软件程序设计    - 12 -
4.1系统流程图    - 12 -
4.2 RFID识别    - 13 -
4.3 一楼还书    - 14 -
4.4 二楼还书    - 15 -
4.5 三楼还书    - 16 -
4.6 四楼还书    - 17 -
第五章通信    - 19 -
5.1 MCGS与SQL数据库通讯    - 19 -
5.1.1 存盘数据浏览构件    - 19 -
5.1.2 ODBC脚本函数    - 20 -
5.2 MCGS与PLC通讯    - 21 -
第六章仿真与调试    - 25 -
6.1仿真调试    - 25 -
6.2 问题及解决    - 28 -
第七章总结与展望    - 30 -
参考文献    - 31 -
致谢    - 33 -
附录    - 34 -
程序    - 34 -

推荐资料