{$cfg_webname}
主页 > 电子信息 > 单片机 >

基于单片机的空气质量监测仪的设计(附元器件清单,程序清单)

来源:wenku163.com  资料编号:WK16314442 资料等级:★★★★★ %E8%B5%84%E6%96%99%E7%BC%96%E5%8F%B7%EF%BC%9AWK16314442
资料介绍

基于单片机的空气质量监测仪的设计(附元器件清单,程序清单)(论文9300字)
摘要:近年来,由于空气质量的恶化,雾霾天气变得越来越多,而这种现象的危害也变得越来越大,中国已经有很多地方把雾霾天气列为灾害性天气预警预报。本设计把STC89C52单片机作为主要控制,利用GP2Y1010AU0F粉尘传感器测量空气中PM2.5的浓度,之后再通过DHT11温湿度传感器测量空气中的温湿度,最后在LCD1602显示屏上显示数值。同时,这项设计之中还加入了蓝牙传输模块,可以通过蓝牙实时将数值传输给手机APP,进行实时监测。
关键字:蓝牙;单片机;PM2.5

Air quality monitor based on single chip microcomputer
Abstract:In recent years,haze weather becomes more and more and the dangers of this kind of phenomenon also become bigger because of the deterioration of air quality.A lot of places of China have put the fog weather as a severe weather warning forecast.This design adopts the STC89C52 single-chip microcomputer as the control core,measuring PM2.5 concentrations in the air by GP2Y1010AU0F dust sensor,and then use the DHT11 temperature and humidity sensor to measure temperature and humidity in the air.Finally,the value is displayed on the LCD1602 screen.At the same time,the bluetooth transmission module is also included in this design,which can transmit data to APP via bluetooth in real time for real-time monitoring.
Key words:bluetooth;Single chip microcomputer;PM2.5
 

基于单片机的空气质量监测仪的设计
基于单片机的空气质量监测仪的设计
基于单片机的空气质量监测仪的设计


目 录
1、引言    1
1.1、设计的主要意义    1
1.2、国内外空气质量状况    1
1.3、设计的主要内容    1
2、硬件电路设计    2
2.1、电路设计概述    2
2.2、单片机最小系统    3
2.3、粉尘传感器电路设计    6
2.4、A/D转换芯片ADC0832    8
2.5、LCD显示模块设计    8
2.6、蓝牙电路    10
2.7、DHT11传感器电路设计    11
3、软件应用及程序设计    12
3.1、软件应用    12
3.1.1、Keil的应用    12
3.1.2、protel99se的应用    12
3.1.3、Proteus的应用    12
3.2、主程序设计    13
3.2.1、程序流程图    13
3.2.2、主程序    13
3.3、子函数设计    15
4、设计应用及相关实验    16
4.1、主要用途及应用场景    16
4.1.1、主要用途    16
4.1.2、应用场景    17
4.2、相关实验及监测分析    17
4.2.1、实验一:宿舍    17
4.2.2、实验二:教室    17
4.2.3、实验三:常见生活场景    18
4.2.4、监测分析    18
4.2.5、PM2.5的应对办法    18
5、总结    19
参考文献    20
致谢    21
附录    24
附录1.元件清单    24
附录2.实物图    27
附录3.程序源代码    27

推荐资料