{$cfg_webname}
主页 > 外文翻译 > 电子翻译 >

基于GSM和CAN技术的车辆防盗控制系统的设计与实现

来源:wenku163.com  资料编号:WK16318747 资料等级:★★★★★ %E8%B5%84%E6%96%99%E7%BC%96%E5%8F%B7%EF%BC%9AWK16318747
资料介绍

基于GSM和CAN技术的车辆防盗控制系统的设计与实现(中文4500字,英文4000字)
Ch.Bhanu Prakash :Assistant Profassor, ECE Dept Malla Reddy Engineering College Secunderabad, A.P, India
K.Sirisha :PG scholar, DSCE Malla Reddy Engineering College Secunderabad, A.P, India
摘要:本项目涉及防盗控制系统的设计与开发,这是用来预防/控制车辆被盗。该系统是基于全球移动通信系统的嵌入式系统,使用CAN总线(GSN)和RFID系统技术。RFID读写器将接口与单片机通过串口连接来检测医院、宾馆、加油站、寺庙等。该开发的系统中使用的移动电话是嵌入在一个连接到发动机控制模块(ECM)的车辆中,通过控制区域网络(CAN)总线,然而反过来也可以连接到ECM。该系统可以使用keil软件实现。
关键词:车辆防盗控制单元、GSM、GPS、CAN、移动电话、发动机控制单元。

Design and Implementation of a Vehicle Theft Control Unit using GSM and CAN Technology
Ch.Bhanu Prakash :Assistant Profassor, ECE Dept Malla Reddy Engineering College Secunderabad, A.P, India
K.Sirisha :PG scholar, DSCE Malla Reddy Engineering College Secunderabad, A.P, India
Abstract: This project deals with the design & development of a theft control system, which is being used to prevent/control the theft of a vehicle. The developed system makes use of an embedded system based on Global System for Mobile communication (GSM) technology with CAN bus along with RFID system. The RFID reader will be interfaced with the microcontroller through serial interface to detect the hospitals, hotels, petrol bunks, temples etc. The developed system makes use of an mobile phone that is embedded in the vehicle with an interfacing to Engine Control Module(ECM) through Control Area Network(CAN) Bus, which is in turn, communicated to the ECM. The proposed system can be implemented using keil software.
Keywords: Vehicle theft controlling unit, GSM, GPS, CAN, Mobile phone, Engine control unit.
 

基于GSM和CAN技术的车辆防盗控制系统的设计与实现

 

推荐资料