导柱式落料模工作原理动画设计制作(Proe三维图,仿真视频)(任务书,中期检查表,设计说明书13000字,Proe三维图,仿真视频动画)
摘要：本段动画的制作有学生努力的成分，但更多的是老师的鼓励和信任。2008年10月份，为配合教学，老师安排我做导柱式落料模的动作过程动画。因为没有制作动画的知识和经验积累，所以制作过程中问题不断，一度曾丧失信心。后来在老师的引导和启发下坚定了信心。制作过程经历了数次的反复，后来经过比较以及上网上咨询，最终选择了自己比较熟悉的pro/E3.0来制作动画。本段动画是基于“pro/E3.0”软件的动画模块来制作的。包括“装配”和“动画制作”两大部分。装配是制作动画的基础，和通常意义上的装配不同的是：制作动画采用的装配方式是“活动装配”。动画制作包括基本的“动作制作”、“定时视图”、“定时透明”等方面的制作。其中的每个方面又有许多需要注意的，在后面的设计说明书部分会详细介绍。本套设计所含内容包括：一份设计说明书，本段动画所用到的“part”文件，制造好的导柱式落料模动画（mpeg格式），并附光碟一张。最后衷心感谢河南机专以及各位老师对学生的培养和关心，祝母校长青，老师们阖家幸福！
关键词：导柱式落料模 动画 活动装配pro/E3.0
Introduction column blanking die design principle of animation
Abstract: Animation of the above efforts to the composition of students, but more to encourage teachers and trust. In October 2008, in line with the teaching, teachers lead me to do column blanking process mode of action animation. Because there is no animation accumulated knowledge and experience, so the issue of continuous production process, once the loss of confidence. Later in the teacher's guidance and inspired confidence in the firm. Production process has undergone repeated several times, after comparison, as well as on-line consultation, the final selection is more familiar with their own pro / E to create animation. Animation of this paragraph is based on the "pro / E" software module to create the animation. Including the "assembly" and "animation" two major parts. Assembly is the basis of animation, and assembly in the normal sense is different: the production of animation used in the assembly is "the activities of the assembly." Animation also includes a "making moves", "view from time to time", "regularly displays" areas such as production. Each of which there are many aspects to note in the back part of the design will go into the detail specification. Design contained in this package include: a design manual, animated by this paragraph part of the document used to create a good lead-column blanking die animation (mpeg format), and an enclosed CD. Finally, sincere thanks to Henan machine, as well as teachers of post-secondary students the training and care, I wish his alma mater, Evergreen, family well-being of teachers!
Key words: guided-mode animation column blanking pro/E3.0
目 录
1绪论………………………………………………………………………………4
1.1 冲压模具市场情况……………………………………………………………4
1.2 冲压模具水平状况……………………………………………………………4
1.2.1 模具CAD/CAM技术状况…………………………………………………5
1.2.2 模具设计与制造能力状况…………………………………………………6
1.2.3 专业化程度及分布状况……………………………………………………7
1.3 冲压模具的发展重点与展望…………………………………………………7
1.3.1 冲压模具产品发展重点……………………………………………………7
1.3.2 冲压模具技术发展重点……………………………………………………8
1.3.3 其他发展重点及展望………………………………………………………8
2 动画设计制作说明………………………………………………………………11
2.1 前期准备工作…………………………………………………………………11
2.2 建模……………………………………………………………………………11
2.3 装配……………………………………………………………………………11
2.3.1下模部分………………………………………………………………………11
2.3.2上模部分………………………………………………………………………12
2.3.3板料的装配……………………………………………………………………13
2.3.4组装上下模……………………………………………………………………13
2.4 动画制作………………………………………………………………………14
2.4.1前期准备………………………………………………………………………14
2.4.2动画制作………………………………………………………………………14
2.4.3基本的“kfs”动作制作……………………………………………………15
2.4.3.1 定时视图制作………………………………………………………………19
2.4.3.2 定时显示/透明视图………………………………………………………20
2.4.3.3 动画输出……………………………………………………………………21
3 结束语……………………………………………………………………………22
致谢 ………………………………………………………………………………23
参考文献……………………………………………………………………………24
|
